The removal method of the stainless steel handle can be selected according to different installation methods and handle types. Here are some common disassembly methods:
First, the disassembly method of the screw fixed handle
1. Prepare tools: First, prepare tools such as screwdrivers and pliers.
2. Remove the screw: Turn the screw counterclockwise using a screwdriver to loosen the screw fixing the handle. If the screw is tight, you can use appropriate force, but be careful not to damage the screw or handle.
3. Remove the handle: When the screw is completely loosened, you can easily remove the handle from the door or furniture.
Second, the disassembly method of glue fixed handle
1. Prepare tools: Prepare tools such as a hair dryer, scraper, and detergent.
2. Heat the glue: Use a hair dryer to heat the handle to soften the glue. This makes it easier to remove the handle from the door or furniture.
3. Pry the handle: Use tools such as a scraper to gently pry open the gap between the handle and the door or furniture, and gradually remove the handle.
4. Clean up residue: After removing the handle, use detergent to clean the residual glue on the surface of the door or furniture.
Third, the disassembly method of the backside bonding handle
1. Prepare tools: Prepare tools such as a hair dryer and suction cups.
2. Heating the adhesive surface: Use a hair dryer to heat the adhesive surface of the handle and the door or furniture to soften the adhesive surface.
3. Remove using a suction cup: Place the suction cup on the heated surface and pull the suction cup to remove the handle from the door or furniture.
Fourth, other disassembly methods
For some special types of handles (such as latch handles, welded handles, etc.), the disassembly method may be different. In this case, it is recommended to refer to the handle manual or consult a professional to obtain the correct removal method.
Fifth, precautions
1. Safety first: During the disassembly process, be careful not to damage the surface of the door or furniture. At the same time, pay attention to safety when using tools to avoid scratching or pinching fingers.
2. Spare parts: the removed screws, glue residue and other parts should be properly kept for use when installing the new handle.
3. Record the position: Before removing the handle, record the position and fixing method of the handle for reference when installing a new handle.
In general, the disassembly method of stainless steel handle needs to be selected according to the specific situation. During the disassembly process, pay attention to safety, retain the parts and record the position and fixation of the handle.
