How do I replace the hinges?

Replacing a hinge is a delicate process, and here are the detailed steps:

First, prepare tools and materials

Screwdriver (Select the right Phillips or flat-head screwdriver depending on the hinge screw type)

wrench

Pliers (may be needed in some cases)

New hinge (make sure to match the old hinge model)

Screws (if required)

Drill bit (if you need to drill in a new location)

Second, remove the old hinge

Support door panels: Use wood blocks or other supports to support door panels to prevent them from falling during removal.

Find the screws: Open the cabinet door or door panel and find the screws on the old hinges.

Loosen the screws: Use a screwdriver to loosen the screws, taking care not to damage the screws or hinges.

Remove old hinges: Remove old hinges from door panels and cabinets or door frames.

Third, cleaning and inspection

Clean the installation area: Clean the installation area on the door panel, cabinet or door frame with a clean cloth to ensure that there is no dust and dirt.

Inspect door panels and cabinets: Inspect door panels and cabinets or door frames for damage, and repair them if necessary.

Fourth, determine the new hinge position

Alignment position: Place the new hinge on the cabinet and door panel to determine the position and ensure that the door piece is aligned with the upper and lower sides of the cabinet.

Mark the hole location: If you need to drill in a new location, use a pencil or marker to mark the hole location.

Fifth, drilling and fixing

Drilling: Use the drill bit to drill a hole in the new location (if necessary).

Secure the new hinge: Align the new hinge with the hole and secure it with a screwdriver and screws. Before fixing, the hinges can be adjusted to a vertical Angle with a ruler or wooden strip to ensure the accuracy of the installation.

Sixth, test and fine tune

Test switch: Gently switch the door panel or cabinet door several times to check whether it is smooth and no different.

Fine tuning: If the door panel or cabinet door is found to tilt or shake, the tightness of the hinge screws can be adjusted appropriately for fine tuning.

Seventh, precautions

Safety first: Handle with care during operation to avoid damaging door panels, cabinets or surrounding items. At the same time, pay attention to personal safety and avoid being cut by hinges or screws.

Accurate matching: Ensure that the new hinge purchased matches the original hinge model to ensure a smooth installation.

Careful operation: Careful operation should be carried out during disassembly and installation to avoid damaging hinges or screws.

Lubrication maintenance: After installation, you can add a little lubricating oil to the moving part of the hinge to keep it running smoothly and reduce noise.

By following the steps above, you should be able to successfully replace the hinge. If you encounter any problems or are unsure how to operate, it is recommended to consult a professional or consult the relevant repair manual or video tutorial.