The use of corner code is mainly determined according to the specific application scenario and type of corner code, but it can generally be summarized as the following basic steps:
First, preparation
1. Check the corner code:
Make sure the edges of the corner code are straight and not damaged or deformed. Corner codes are usually used to connect components that intersect at 90 degrees, and their shapes and sizes need to be selected according to the specific application scenario.
2. Prepare tools:
Prepare rulers, pencils, screwdrivers, bolts, and nuts based on installation requirements.
Second, install the Angle code
1. Positioning and marking:
Use a ruler and pencil to mark the position of the corner codes on the members that need to be connected, ensuring that the corner codes are correctly aligned and intersect at a 90 degree Angle.
2. Installation Angle code:
For connections between aluminum profiles, the corner code can be fixed directly to the aluminum profile, usually using bolts and nuts for fastening. The use of corner codes is an external connection and does not require drilling of aluminum profiles.
For the connection between the sheet and the aluminum profile, one end of the corner code can be fixed to the aluminum profile and the other end is bolted to the panel.
3. Fastening and adjustment:
Fasten bolts and nuts in place using a screwdriver or other tool to ensure a tight connection between the corner code and the component. Adjust the position of the corner code as required to ensure that the connection is stable and meets design requirements.
Third, special cases
1. Use of steering corners:
A steering corner is a special type of aluminum corner that is used to connect two aluminum profiles that are not vertical or horizontal. When using the steering Angle, it is necessary to adjust the position of the steering Angle according to the Angle between the two aluminum profiles, and use bolts and nuts to tighten.
2. Glue treatment:
In some cases, in order to improve the strength and sealing performance of the connection, a group of corner glue can be injected between the corner code and the profile. Before gluing, it is necessary to ensure that the gap between the corner code and the profile is clean and free of debris. After gluing, it is necessary to wait for the group of horn glue to cure.
Fourth, precautions
1. Select the appropriate corner code:
Select the appropriate corner code type, form and material according to the material, size and stress of the connecting member.
2. Ensure installation accuracy:
During installation, ensure that the corner codes are correctly positioned, securely connected, and meet design requirements.
3. Pay attention to safe operation:
When using tools such as screwdrivers, bolts, and nuts, observe safe operations to avoid accidental injuries.
To sum up, the installation method and procedure of corner code need to be determined according to the specific application scenario and corner code type. In the process of operation, it is necessary to pay attention to safety, accuracy and the selection of the appropriate corner code type to ensure the stability and reliability of the connection.
