The installation method of wrought iron fence usually includes the following steps:
First, preparation
1. Material preparation:
– Purchase wrought iron fence materials that meet the design requirements to ensure that their quality is qualified, with good strength and corrosion resistance.
– Prepare auxiliary materials such as expansion bolts, welding rods, and anti-rust paint required for installation.
– Prepare welding machine, cutting machine, Angle grinder, wrench, level, tape measure and other construction tools.
2. Site preparation:
– Clean up the construction site to ensure that the installation area is smooth, clean and free of obstacles.
– According to the design drawing, use tools such as tape measure and level to measure and lay out lines in the installation area to determine the installation position and height of the fence.
Second, install the column
1. Mark location:
– Mark the position of the column on the ground to ensure that the column spacing is even and meets the design requirements.
2. Punch and fix:
– Use a hammer drill to drill holes on the marked posts. The depth and diameter of the holes must be calculated according to the specifications of the column and the dimensions of the embedded parts.
– Insert the expansion bolts, align the posts of the wrought iron fence with the expansion bolts, and tighten the nuts with a wrench to secure the posts.
– Use a level to check the vertical of the column. If there is any deviation, adjust it in time.
Third, install the beam and cross bar
1. Connect the beam:
– According to the design requirements, the beam and the column are welded or bolted. Make sure the beams are level and evenly spaced.
2. Install the crossbar:
– Install horizontal bars on the beam one by one according to the design pattern, paying attention to keeping the spacing consistent and the lines smooth.
– Ensure that the cross bar and beam are firmly connected, and the welding place is firm and beautiful.
Fourth, install decorative pieces and beautify
1. Install decorative parts:
– According to the design requirements, install the decorative parts of the wrought iron fence, such as patterns, patterns, etc. Ensure that the decorative pieces are installed firmly and in harmony with the overall style of the fence.
2. Grinding and anti-rust treatment:
– Polish welding and cutting areas to remove burrs and rust.
– Apply anti-rust paint to ensure that the fence has good corrosion resistance. According to customer needs, the fence surface can be sprayed with favorite colors or patterns to add beauty.
Fifth, check and adjust
1. Comprehensive inspection:
– Complete inspection of the installed wrought iron fence to ensure that it meets the design requirements and construction specifications.
– Check the fence for firmness, verticality, levelness, appearance quality, etc.
2. Adjustment and repair:
– If there is any problem, timely rectification until acceptance. The damage and defects in the installation process should be repaired in time.
Sixth, precautions
1. Material quality:
– Strictly control the quality of wrought iron fence materials and choose products produced by regular manufacturers.
– Inspection of incoming materials, unqualified materials shall not be used.
2. Construction safety:
– Construction personnel must wear safety protective equipment such as safety helmet and seat belt.
– When working at heights, safety nets must be set up to ensure the safety of construction.
– When using electric tools such as welding machines and cutting machines, the operating procedures should be strictly observed to prevent electric shock and mechanical injury accidents.
3. Welding quality:
– Welding personnel must have the corresponding qualification certificate to ensure that the welding quality meets the requirements.
– When welding, pay attention to controlling welding current and welding speed to ensure that the weld is full and firm.
– Polish the welding joints to remove welding slag and burr, so that the weld surface is smooth and beautiful.
4. Finished product protection:
– During the construction process, pay attention to the protection of the installed wrought iron fence to prevent collision and damage.
– It is strictly prohibited to hang heavy objects or other destructive acts on the fence.
– After the completion of construction, clean up the construction site in time to keep the environment clean.
Through the above steps and precautions, you can ensure the installation quality and safety of the wrought iron fence. In actual operation, it is also necessary to adjust and improve according to specific design requirements and field conditions.
