There are many types of vacuum valves, which can be divided into various types according to different classification standards. The following are some common types of vacuum valves: First, classification by function…
A vacuum valve is a valve used in a vacuum system with a working pressure below standard atmospheric pressure. The main function of the vacuum valve is to control the opening and…
As a control component in the fluid conveying system, the valve has the functions of cutoff, regulation, diversion, prevention of countercurrent, pressure regulation, shunt or overflow pressure relief. Valves are classified in…
The working principle of rivets is mainly to achieve connection through deformation. Specifically, the working principle of rivets can be divided into the following steps: First, preparation 1. Select the right rivets:…
The use of rivets mainly depends on the type of rivets and the material required to be connected. The following are some of the common rivet use methods and steps: First, the…
There are various ways of rivet riveting, mainly depend on the type of rivet, application scenarios, and the available tools. Here are some common rivet riveting methods: First, manual riveting For small…
Rivets can be installed in a variety of ways, depending on the type of rivets, application scenarios, and available tools, installation methods will vary. The following are some common rivet installation methods:…
As a mechanical fastener, rivet has a very wide range of application, covering almost all areas that need to be connected and fixed. The following is the main scope of application of…
The specifications of rivets mainly include diameter, length, head type, rod length and taper. The following is a detailed introduction to the rivet specifications: First, diameter The diameter of the rivet is…
When purchasing rivets, you need to pay attention to the following key points to ensure that the selected rivets can meet the needs of use, and have good quality and performance. First,…
A rivet is a nin-shaped object used to connect two parts (or members) with a through hole and a cap at one end. During the riveting process, it uses its own deformation…
Rivets are made of a variety of materials to adapt to the needs of different industries and application scenarios. Common rivet materials include the following: 1. Aluminium and aluminium alloy: Aluminum rivets…