What should I do if the door hinges sound?

Door hinges can rattle for a variety of reasons, such as loose hinges, rust, inadequate lubrication, or improper installation. To solve these problems, the following are some effective ways to deal with them:

1. Readjust the hinges

Cause: The hinge and hinge pin are fine, and the squeaking may be caused by the hinge being slightly misaligned.

Treatment method: readjust the hinge and correct the misalignment. This usually involves loosening the screws on the hinge, then gently moving the hinge to adjust its position, and finally tightening the screws again.

2. Use lubricant

Reason: Hinges make a noise due to friction.

Treatment: Apply a lubricant such as WD-40, silicon lubricant, or grease to the moving parts of the hinge. These lubricants can penetrate into the tiny gaps in the hinge, reducing friction between the metals and thus eliminating the sound.

3. Apply butter or other grease

Cause: Insufficient lubrication or rust on the hinges.

Treatment: Grease the hinge pin with butter, vegetable oil or olive oil. These oils provide good lubrication and reduce friction and wear on the hinges, thus eliminating noise.

4. Tighten the screws

Cause: The screws on the hinge are loose, causing the hinge to shake or misposition.

Solution: Use a screwdriver to turn the screw counterclockwise and tighten it. Make sure the screws are firmly fixed to avoid friction and noise caused by loosening.

5. Add rubber pad to hinge contact surface

Reason: The hinge is a direct contact between metal and metal, and friction produces noise.

Treatment method: Add a small piece of rubber pad between the contact surface of the hinge. Rubber pads can play a role in cushioning and sound insulation, effectively reducing the noise generated by hinge friction.

6. Replace the hinges

Reason: The hinge has been severely worn or damaged and cannot be repaired by the above methods.

What to do: Buy and install a new hinge. Make sure the new hinges match the original model and follow the correct steps to install and adjust them.

7. Other precautions

Slow down the opening and closing speed: Slowing down slightly every time you open or close the door can reduce the noise caused by the friction of the hinge.

Regular inspection and maintenance: Regular inspection of the fastening and lubrication status of the door hinge, timely detection of problems and treatment, can extend the service life of the hinge and reduce noise.

To sum up, in view of the door hinge noise problem, can take a variety of methods to deal with. The specific method should be selected based on the actual situation. If the cause cannot be determined or the fault cannot be resolved by yourself, consult professionals to repair and maintain the fault.